3214A-2RS1/MT33 SKF Double row angular contact ball bearing
+
  • 3214A-2RS1/MT33 SKF Double row angular contact ball bearing

3214A-2RS1/MT33 SKF Double row angular contact ball bearing

Category：

3214A-2RS1/MT33 SKF Double row angular contact ball bearing

WhatsApp:+8613585510566

Email:sales@rm-bearing.com

Message

Product Description

Brand:SKF

Item Number:3214A-2RS1/MT33 SKF

Also known as

3214A-2RS1

3214-BD-XL-2RSR

EAN:7316571432101

Category:Angular Contact Ball Bearing Double Row

Weight and Dimensions

Inner (d) MM:70,00

Outer (D) MM:125,00

Width (B) MM:39,70

Inner (d) Inch:2.7559

Outer (D) Inch:4.9213

Width (B) Inch:1.5630

Weight (kg):1.78

Suffix description

A

Double Row Angular Contact Ball Bearing Without Filling Slots

2RS1

Sheet Steel Reinforced Contact Seal Of Acrylonitrile-Butadiene Rubber (NBR) On Both Sides Of The Bearing

MT33

Lithium Grease, Medium Temp. 74 cSt @ 40°C, -30°C/+120°C, A Two-Figure Number Following MT Identifies The Actual Grease. An Additional Letter Or Letter/Figure Combination As Mentioned Under "HT" Identifies Filling Degrees Other Than Standard. Examples: MT33 Or MT37F9

Product description

The 3214A-2RS1/MT33 SKF is a double-row angular contact ball bearing with solid inner- and outer rings. The design of this bearing type resembles two single-row angular contact ball bearings in O-arrangement but is slightly narrower. Double-row angular contact ball bearings can support high radial forces and axial forces in both directions. The greater the contact angle, the greater the axial load capacity of the bearing.

 

MESSAGE

Submit