+
  • NSK Spherical Roller Bearing3(1704291429659).jpg

NSK Industry Crusher Bearing Stability Spherical Roller Bearings 24132CA

Spherical roller bearings consist of a common spherical raceway outer ring and two rows of spherical rollers between the double raceway inner ring. The spherical roller bearings is self-aligning, and can automatically adjust the misalignment caused by the deflection or misalignment of the shaft or bearing seat, and the allowable alignment angle is 1~2.5 degrees. Spherical roller bearings can bear radial load, bidirectional axial load and its combined load, especially the radial load capacity is large, and it has good anti-vibration and impact resistance. It is widely used in iron and steel metallurgical equipment, mining equipment, cement machinery, paper machinery, ships, coal mills, petroleum machinery, engineering machinery, etc.

Category：

Spherical Roller Bearings

WhatsApp:+8613585510566

Email:sales@rm-bearing.com

Message

Product Description

Spherical roller bearings consist of a common spherical raceway outer ring and two rows of spherical rollers between the double raceway inner ring. The spherical roller bearings is self-aligning, and can automatically adjust the misalignment caused by the deflection or misalignment of the shaft or bearing seat, and the allowable alignment angle is 1~2.5 degrees. Spherical roller bearings can bear radial load, bidirectional axial load and its combined load, especially the radial load capacity is large, and it has good anti-vibration and impact resistance. It is widely used in iron and steel metallurgical equipment, mining equipment, cement machinery, paper machinery, ships, coal mills, petroleum machinery, engineering machinery, etc.

 

 

Features: 

CA type self-aligning roller bearings, the inner ring has no middle ribs, and there are small ribs on both sides, equipped with symmetrical rollers, brass or cast iron cages.

 

Advantages: 

The cage of CA type spherical roller bearing is designed as an integral cage. In addition to bearing radial load, this type of bearing can also bear bidirectional axial load and its combined load. It has a large bearing capacity and has good resistance impact capability.

 

 

Bearing rings and rolling elements can be made of a number of different materials, but the most common is "chrome steel", (high carbon chromium) a material with approximately 1.5% chrome content. Such "chrome steel" has been standardized by a number of authorities, and there are therefore a number of similar materials, such as: AISI 52100 (USA), 100CR6 (Germany), SUJ2 (Japan) and GCR15 (China).

 

Some common materials for bearing cages:

The choice of material is mainly done by the manufacturing volume and method. For large-volume bearings, cages are often of stamped sheet-metal or injection molded polyamide, whereas low volume manufacturers or low volume series often have cages of machined brass or machined steel. For some specific applications, special material for coating (e.g. PTFE coated cylindrical bore for vibratory applications) is adopted.

 

 

24100 series

Model

 d mm

D mm

H mm

W kg

24124CA

120

200

80

10

24132CA

160

270

109

25

24134CA

170

280

109

26.5

24136CA

180

300

118

33.5

24138CA

190

320

128

42

24140CA

200

340

140

52

24144CA

220

370

150

65

24148CA

240

400

160

80.5

24152CA

260

440

180

110

 

 

 

Factory Appearance

The factory mainly produce Tapered roller bearing, Deep groove ball bearing, Wheel hub bearing, Clutch release bearing, Pillow block bearing, etc. After ten years in the global market, Yajun Bearings get a high reputation among following Countries and regions: Russia, Algeria, Egypt, Italy, Korea, Mexico, Brazil, South Africa, Turkey, Iran, Pakistan, Singapore, Philipphines, USA and so on.

Welcome all of customers visit our factory and cooperate for mutual benefit.

 

MESSAGE

Submit