NSK 7020AC Angular Contact Ball Bearing

Angular contact ball bearings can bear radial load and axial load at the same time.Able to work at high speed.The higher the contact Angle, the higher the axial bearing capacity.The contact Angle is the Angle between the contact line of the ball and raceway in the radial plane and the vertical line of the bearing axis.High precision and high speed bearings are usually 15 degrees of contact.The contact Angle will increase under axial force.

Category：

Angular Contact Ball Bearings

WhatsApp:+8613585510566

Email:sales@rm-bearing.com

Message

Product Description

Bearing description:

Single row angular contact ball bearings can only withstand axial load in one direction. When such bearings are subjected to pure radial load, they must be installed and used in pairs because the line of action of the rolling body load and the line of action of the radial load are not in the same radial plane, resulting in an internal axial component.

Design features:

Single row angular contact ball bearings can only withstand axial load in one direction. When such bearings are subjected to pure radial load, they must be installed and used in pairs because the line of action of the rolling body load and the line of action of the radial load are not in the same radial plane, resulting in an internal axial component.

There are three different configuration types of paired angular contact ball bearings:

(1) back-to-back configuration, after code DB(such as 70000/DB), this configuration has good rigidity, good performance under overturning moment, bearing can withstand two-way axial load;

(2) face to face configuration, after code DF(such as 70000/DF), this configuration of rigidity and ability to withstand overturning moment is not as good as DB configuration, bearing can withstand two-way axial load;

(3) Series configuration, after the code DT(such as 70000/DT), this configuration can also series three or more bearings at the same support, but can only bear a single direction of the axial load. Usually, in order to balance and limit the axial displacement of the shaft, the other support shall be equipped with a bearing capable of bearing the axial load in the other direction.

In addition, a single row angular contact ball bearing is available for any pairing. This kind of bearing is specially processed and can be combined in any way such as two back-to-back, two face to face or two in series. The axial clearance of pairing combination can be selected according to needs. The post code CA means the axial clearance is small, CB means the axial clearance is moderate, and CC means the axial clearance is large.

Universal matching bearings can also be configured into bearings with pre-interference according to the requirements of use, and the code GA, GB, GC. GA represents small preinterference after pairing. GB indicates moderate preinterference after pairing; GC indicates a large preinterference after pairing.

Factory Appearance

The factory mainly produce Tapered roller bearing, Deep groove ball bearing, Wheel hub bearing, Clutch release bearing, Pillow block bearing, etc. After ten years in the global market, Yajun Bearings get a high reputation among following Countries and regions: Russia, Algeria, Egypt, Italy, Korea, Mexico, Brazil, South Africa, Turkey, Iran, Pakistan, Singapore, Philipphines, USA and so on.

Welcome all of customers visit our factory and cooperate for mutual benefit.

Angular Contact Ball Bearings